41
MANUAL OPERATION
neck roller position
reclining
programmed
operation
/
manual
operation
intensity
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
position
1
3
4
1. Press the
button
• The ON/OFF lamp will come on.
• You can now select either Strong or Gentle or one of the manual
settings that can be accessed by opening the cover of the
controller.
2. Open the Cover of the Controller
• All of the manual operation buttons will start
to flash.
3. Selecting the Massage Type Required
• Press the button of the massage you require.
The button will be lit.
• The seat will automatically recline to the massage position.
Use example, Selecting knead.
MANUAL OPERATION FOR THE UPPER BODY
neck roller position
reclining
programmed
operation
/
manual
operation
intensity
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
position
gentle
strong
leg massage
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
Combining Massages
• It is possible to combine massage types.
• It is not possible to combine massage types in the same category.
Example 1 Adding Tap B when Knead is selected.
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
Example 3 Deselecting Roll.
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
Example 2 Adding Roll to the selection.
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
Press
Press
Press
Press
Changing Massage Types
Example 1 Changing massage types in the same category.
(Changing to Shiatsu when Knead is selected.)
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
Press
• Please check that there are no children or pets in the vicinity of the unit before use.
40
4. Selecting an Area for Concentrated Massage
• Please see Page 46–48 for details regarding the programs.
6. Auto Stop in Programmed Operation
When the selected program has been completed, the unit will automatically come to a stop.
(Although programmed operation lasts for approximately 15 minutes (12–17 minutes), this will vary according to
the shoulder position and program selected, whether or not tapping is on or off, and the weight of the person
using the unit.)
• The massage heads will move to the retracted position and stop.
• The ON/OFF lamp will flash until the heads have stopped moving.
• If you want to start another massage, please press the
button.
• Please unit at least 10 minutes between massages to allow your body to rest.
7. Stopping Programmed Operation
Press the
button to stop programmed operation.
• The ON/OFF lamp will continue to flash until the massage heads have returned to the retracted position.
8. Stopping the Massage Immediately
Press the
button to stop programmed operation immediately.
• All movement will stop immediately.
• The massage heads will not return to the retracted position, which may make sitting in the seat somewhat
uncomfortable.
• Please press the
button twice in order to return the massage heads to the retracted position.
Massaging the Lower Back
• Press this button to focus on the lower back.
(The neck and shoulders will also be massaged
slightly.)
• Press the button
again to cancel.
• When the Shoulder Position Indicator is flashing, adjust the position of
the massage heads (upper roller) so that they lightly touch the shoulder.
• The shoulder position can be adjusted up and down 10cm.
• When it is not possible to correctly adjust the shoulder position, slide
your body down and try adjusting it again.
• Lightly touching the shoulder.
Too high
Correct position
Too low
Massaging the Neck and Shoulders
• Press this button to focus on the neck and shoulders.
(The upper and lower back will also be massaged
slightly.)
• Press the button
again to cancel.
lower back
neck, shoulder
lower back
neck, shoulder
5. Removing Vibration and Tapping from Programs
Removing Tapping from Programmed Operation
• Press this button to remove tapping in
programmed operation. (The tapping will change
to a kneading massage.)
* Press the button
again to restore
tapping to the
program.
Removing Vibration from Programmed Operation
• Press this button to remove vibration in programmed
operation. (The vibration will change to a kneading
massage.)
* Press the button
again to restore
vibration to the
program.
tap on/off
vibration on/off
tap on/off
vibration on/off
Press
Press
Press
Press
• For Tapping and Vibration, unless the massage heads are actually touching the body, you may not feel
anything.
Please always check that the unit is not in operation before sitting down.
