7
nac 52 connection to supercap power supply
bnc plug assembly
to nap 135, & 500
power amplifiers
to nap 140, 150, 180 &
250 power amplifiers
mains input
cable
direction
marker
4 to 4 pin DIN
5 to 5 pin DIN
Burndy
Interconnect Cables
bnc plugs are employed for phono inputs on the nac 52, 82 and 102. To wire a bnc
plug proceed as follows in conjunction with the illustrations opposite:
Place the
clamp nut
and
plain gasket
over the cable and cut back the cable outer
sheath 9mm.
Comb out the copper braid and insert the
ferrule,
Trim the core insulation to 4mm and apply a thin layer of solder to the cable centre
conductor.
Mount the
rear insulator
over the core insulation and solder the
male contact
to the
core conductor.
Slide the
clamp nut
and
plain gasket
up to the
ferrule
and fit the
front insulator
onto the
male contact.
Slide the
plug body
over the assembly and tighten using the
clamp nut.
plug body
trim braid to here
solder to cable before final asssembly
0.5mm
4mm
front
insulator
male
contact
rear
insulator
plain
gasket
ferrule
clamp
nut
