NAIM FLASH REMOTE HANDSET, Manual

Page: 10 / 16

3. Note the orientation of the PIC in the PIC Socket . There is a
chamfer with a dot located on one side of the PIC . The
replacement PIC must be inserted with the same orientation.
4.
5.
6.
7.
8.
Attach an anti-static earth strap to your wrist and connect the
crocodile clip to the top negative battery terminal (connected to
the black wire).
You will notice two recesses on opposite corners of the PIC
Socket. Place the small barbed end of the PIC extraction tool
into one of the recesses in the corner of the PIC Socket . Lever
the PIC partially out of its socket. Place the barbed end into the
opposite recess and lever the PIC fully out of the socket.
Place the replacement PIC squarely into the socket. ENSURE
CORRECT ORIENTATION . Apply mild pressure to push the PIC
into the socket so that it is flush to the top of the socket.
Replace the batteries and rear cover. Your Flash display should
now show the enhanced display format.
Your Flash handset has now been updated.
8