Hang Indoor Unit(
For finished concrete bricks)
1 Use the uncluded paper template to cut a rectangular hole in the ceiling, leaving at Ieast
1 m (39")on all sides. The cut hole size should be 4cm(l .6") larger than the boby size. Be
sure to mark the areas where ceiling hook hole will be drilled.
>1m(39")
>1m(39")
>1m(39")
>1m(39")
CAUTION
!!
The unit body should align
perfectly with the hole. Ensure
that the unit and the hole are
the same size before moving on.
2 Drill 4 holes 5cm (2") deep at the ceiling hook positions in the internal ceiling. Be sure
to hold the drill at a 90 angle to the ceiling.
3 Using a hammer, insert the ceiling hooks into the pre-drilled holes. Secure the bolt
using the washers and nuts.
4 Install the four suspension bolts.
Hanging screw bolt
Hanging bolts
Supporting
angle steel
Wooden construction
Put the square timber over the roof beam,
then install the hanging screw bolts.
Timber over the beam
Roof beam
Hanging Screw
Ceiling
New Concrete Bricks
For finished concrete bricks
(
Blade shape
insertion
)
(
Slide insertion
)
Inlaying or embedding the screw bolts.
Install the hanging hook with expansible
bolt into the concrete deep to 45~50mm
to prevent loose.
Steel bar
Embedding screw bolt
(Pipe hanging and embedding
screw bolt)
Install the supporting angle steel.
Steel roof beam structure
Bolt
