Nahita 910/5, Manual

Page: 4 / 16

Press MODE/MEAS (1.3) .
With /C/T/S (1.5) or /SAVE (1.6) select "VIEW" on display.
Press ENTER/PRINT (1.4) , so as the equipment enters the data visualization mode.
The last result that has been saved will be displayed.
Note: If there are no saved data at that measuring mode, "NULL" will be displayed.
Use /C/T/S (1.5) to /SAVE (1.6) to see in turn all the saved data. The position num-
ber of each datum will be shown at the lower left side of the screen.
Press ENTER/PRINT (1.4) to exit the data visualization mode.
Press MODE/MEAS (1.3) to return to the measuring mode.
3. Data deleting
This function allows deleting all the data saved in a particular measuring mode:
Select the desired measuring mode by pressing /C/T/S
(1.5) .
Press MODE/MEAS (1.3) .
With /C/T/S (1.5) or /SAVE (1.6) select "DEL" on display.
Press ENTER/PRINT (1.4) so as the equipment enters the data deleting mode.
SURE" will be displayed
Press ENTER/PRINT
(1.4) and all the data saved in that measuring mode will be dele-
ted.
Note: Only the data saved in that measuring mode will be deleted. To delete the data
saved in any other measuring mode, firstly select that mode and then proceed as pre-
viously described.
While data are deleted "DEL--" will be displayed.
Once the process has finished "DEL" will be displayed.
Press MODE/MEAS
(1.3) to return to the measuring mode.
4. Data printing
The results obtained with the conductivity meter 910/5 can be printed with a TP-16 prin-
ter. For this purpose, connect the conductivity meter with the printer through the interfa-
ce RS232.
To print the current result:
In measuring mode used, press ENTER/PRINT (1.3) .
While the current result and the temperature of the solution analyzed are printed,
"PRN" will be displayed at the lower left side.
Once printing is finished, the instrument returns to the measuring mode.
To print the saved data:
Select the measuring mode whose data are going to be printed.
Press MODE/MEAS
(1.3) .
With /C/T/S (1.5) or /SAVE (1.6) select "PRN" on display.
Press ENTER/PRINT (1.4).
"SURE" will be displayed.
ENGLISH CASTELLANO
Pág. 4 Manual de instrucciones 50910050 Revisión 1 Junio-07
1.1 Pantalla cristal líquido (LCD)
1.2 ON/OFF: encendido/apagado
1.3 MODE/MEAS
1.4 ENTER/PRINT
1.5 /C/T/S
1.6 /SAVE
1.7 Célula de conductividad (no incluida)
1.8 Sonda de temperatura
ON
OFF
ENTER
PRINT
MODE
MEAS
SAVE
C/T/S
S
S
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
3. ESPECIFICACIONES TÉCNICAS
Rango
0.00-19.99 S/cm;
20.0-199.9 S/cm;
200-1999 S/cm;
2.00-19.99 mS/cm;
20.0-199.9 mS/cm
μ
μ
μ
Referencia
50910050
Resolución
0.01 S/cm;
0.1 S/cm;
1 S/cm,
0.01 mS/cm;
0.1 mS/cm
μ
μ
μ
Coductividad
Version 1 June-07 Instruction manual 50910050 Page 29
S
S
S
S
S
S
S
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
S
S
Š
Š
Š