EN
29
Application
PLEASE NOTE!
•
Do not use the device for longer than 60 seconds
on one spot and no more than twice a day so that
you do not irritate the skin on the face too much.
1
Place the attachment you want on the main device (
4
)
(see the “Attaching / Detaching Attachments” chapter).
2
Moisten your skin a little if necessary. The massage
device does not work on completely dry skin.
3
Hold down the On / Off switch (
3
) for around 5 seconds.
The massage device automatically switches to the mode
which was used last.
4
Select the mode you want by pressing the On / Off switch
several times:
–
HOT/VIBR
Heat and micro-massage (vibration)
–
HOT
Heat
–
VIBR
Micro-massage
(vibration)
The corresponding control lamp (
5
) lights up.
5
Place the attachment on the skin and guide it over your
skin applying slight pressure. Always spend around 30
to 60 seconds on each spot.
6
To switch off the device, hold down the On / Off switch for
approx. 5 seconds.
