background image

Congratulations on purchasing this Original Cumaru Rope Porch Swing. 

QUESTIONS REGARDING THIS PRODUCT? Call our customer service team, 

1-800-344-6433.

INSTALLATION - 

Install the ceiling hooks in the overhead support. The hooks should 

be approximately 5 feet apart. The supports can be ceiling joists, a sturdy limb, or 

a beam installed for the swing. A ready made stand or instructions to build one are 

available, please inquire. If the ceiling joists are not exposed, locate one using a stud 

finder. They are usually 16 to 25 inches apart. Once you find a suitable support, drill 

a 3/16” starter hole to screw the ceiling hooks into and tighten until the shank is no 

longer visible. Do not adjust the chains as they are properly connected and able 

to withstand approximately 500 lbs. of weight. We have replacement chain sets 
available for sale if needed.

MAINTENANCE

 - Sunwax Penetrating Wood Feeder

TM

 is recommended as an 

added protection for wood from insects and weather. It is ideal for cumaru, 

revitalizes the look of older wood and helps maintain wood’s original hue. To 

clean rope use soap, detergent or a mild bleach solution. Use a soft bristled scrub 

brush to work on any stains. Be sure to rinse the ropes thoroughly after cleaning. 

WARRANTY & RETURNS

 - Nags Head Hammocks products are guaranteed to 

be free of defects in both workmanship and material. Prolonged exposure to 

weather conditions including snow, rain, and humidity are not covered under 

the warranty, nor is damaged caused by normal wear, mildew, or improper care, 

including storage, maintenance, and assembly. If you are not satisfied with an 

item, return it unused in its original packaging for a complete refund or exchange. 

You can return it to any of our stores or to our warehouse, Nags Head hammocks, 

305 Industrial Blvd., Greenville, NC 27834. Please include a copy of your receipt 

and your contact information. 

ASSEMBLY

5065NH-CM / 0617

STEP 5.

 Use 2.5” barrel bolt and bolt nut to attach upper 

rope seat outside and middle verticals. Use (2) eye bolts, 

(4) washers, and (2) nuts to attach shorter end of chain 

set to upper seat support. Use (2) eye bolts, (4) washers, 

and (2) nuts to attach longer end of chain set to left and 

right arms. 

(Rope not pictured)

NUT

2.5” BARREL 

BOLT

2.5” BARREL 

NUT

3.5”

EYE BOLT

3.5”

EYE BOLT

LONG CHAIN

SHORT 

CHAIN

MEDIUM 

CHAIN

WASHER

Reviews: