ASSEMBLY
STEP 4.
Remove table.
Use 2.25” hex bolt,
washer, and bolt nut to
attach lower rope seat
support to center table
support. Replace table
and tighten all bolts.
STEP 3.
Use (3) 2.5”
barrel bolts and (3)
barrel nuts to attach
upper support to
verticals.
(Rope not
pictured)
BARREL NUT
2.5” HEX
BOLT
OUTSIDE
VERTICAL
MIDDLE
VERTICAL
TABLE
OUTSIDE
VERTICAL
2.5” EYE BOLT
2.5” EYE
BOLT
2.5” HEX
BOLT
3.5” HEX
BOLT
LOCK
NUT
WASHER
BARREL
NUT
LOWER
ROPE SEAT
SUPPORT
STEP 1.
Use (3) 2.5” lag bolts
and (3) washers to attach
left arm, right arm, and center
table support to lower support.
STEP 2.
Use (4) 2.5” hex bolts,
(8) washers, and (4) lock nuts
to attach (2) outside verticals
to left and right arms.
Use (2) 3.5” hex bolts, (4)
washers, and (2) lock nuts
to attach table and middle
vertical to center table support.
NOTE.
do
not
tighten bolts
until Step 4.
WASHER
2.5” LAG
BOLT
LOWER
SUPPORT
LEFT
ARM
CENTER TABLE
SUPPORT
RIGHT
ARM
2.5” BARREL BOLT
UPPER
SUPPORT
2.25”
HEX BOLT
WASHER
