Nagravision DMT 1761, User Manual

Page: 9 / 32

Decreases or Increases the level of audio
Power Button
Switches Power On or into Stand-By Mode
1.3 Rear Panel
DC POWER
Power Supply Input
CABLE IN
RF Input
( Coax Cable) This is used to connect the cable from the wall to the Digital Set-Top Box.
ANT OUT
RF Output
(Coax Cable) When the Digital Set-Top Box is in Stand-By mode, this output can be connected to a
TV/VCR directly.
DIGITAL AUDIO OUT
SPDIF Output
(Black RCA Connector) Used with a home cinema receiver or amplifier.
VIDEO OUT
Video Output
(Yellow RCA Connector) connects into a TV or VCR.
AUDIO OUT (R-L)
Stereo Audio Outputs
(Red and White RCA Connectors) Right (Red) and Left (White) connect into a TV, VCR or Hi Fi.
S-VIDEO OUT
Composite S-Video Output
(S-Video Connector) S-Video out to S-Video into a TV or VCR.
CABLE OUT TO TV/VCR
RF Output
(Coax Cable) This can be used to connect to a TV or VCR using a Coax Cable to the Digital
Set-Top Box.
CH 4-CH 3
Switch
Selects TV Channel 3 or 4 as the output channel to your TV. For optimum performance, it is
recommended that you set the CHANNEL output switch on the back of the Digital Set-Top Box to
channel 4.