Audio Technology Switzerland S.A.
- 29 -
Auto Gain Control (AGC)
AGC (Auto Gain Control) adjusts the gain automatically
according to the input sound levels.
AGC keeps the overall sound level even during recording by
increasing levels when input levels are low and attenuating
them when input levels are high.
1 Sliding AGC switch ON (on the rear of unit) before starting
recording.
y
AGC switch [ON] : Turns AGC on
y
AGC switch [OFF]: Turns AGC off.
2 Press REC button to start recording.
y
The AGC status mark shown in the screen is
during the
pre-recording.
y
The AGC status mark shown in the screen is
during the
recording.
3 Long-press the STOP button to stop recording.
Note:
y
Set to AGC to record voices of people both near and far at
the same volume such as during meetings.
y
When the VOR function is enabled, AGC function is invalid. It
is defaulted to off.
y
You can’t use manual gain adjustments while the AGC
function is enabled.
Summary of Contents for LINO
