background image

Warranty

Audio Technology Switzerland SA certifies that this device has been inspected and 
tested before leaving the factory. Every Nagra unit goes through our test laboratory. 
The result of the measurements is recorded in the “Protocol” documentation that 
comes with your device. We guarantee our products against all manufacturing 
defects. For the HD DAC X, this is for a period of three years from the date of delivery 
to the customer (validated by the serial number on the device casing and the invoice 
from an official Nagra dealer). This warranty is only valid for the original purchaser of 
new equipment. This limited warranty covers the repair and replacement of defective 
parts, excluding any other remedy.

The absence of a serial number invalidates the warranty.

We decline any responsibility for damages resulting directly or indirectly from the 
use of our products and from the use of any components or spare parts other than 
those designated as original/approved parts by Audio Technology Switzerland SA.
As we constantly strive to improve our products, we reserve the right to modify them 
or change their specifications without notice.

Package contents

The package of your HD DAC X includes the following parts: 
One ① HD DAC X audio device chassis
One ① HD DAC X power supply chassis
Four ④ ceramic balls
One ① user manual
One ① pair of microfiber gloves « Haute Horlogerie »
One ① power cord*
Two ② umbilical cords with LEMO plugs
One ① set of fuses (for 100V~ – 127V~ or 230V~ – 240V~, depending on your country)
One ① remote control unit and its docking station with 3 x AA dry cells

Please contact your Nagra dealer should anything be missing.

* Depending on your country, the power cord features either a US, European or Swiss plug.

01

NAGRA

 

HD DAC X // SAFETY WARNING //

 

06 + 07

Summary of Contents for HD DAC X

































Reviews: