background image

Command Description

BLUP 

Increase backlight intensity

BLDOWN 

Decrease backlight intensity

MUON 

Mute ON

MUOFF 

Mute OFF

PHON 

Set phase inversion

PHOFF 

Reset phase inversion

PWON 

Power on the device

PWSTANDBY  Set device to standby (or power off)
SILEFT 

Previous input

SIRIGHT 

Next input

SI1 

Select input 1

SI2 

Select input 2

SI3 

Select input 3

SI4 

Select input 4

SI5 

Select input 5

SI6 

Select input 6

SI7 

Select input 7

Tube ageing

Nagra selects the HD DAC X tubes according to exacting criteria. Their theoretical 
minimum useful life is 5’000 hours. In actual fact, some tubes operate consistently for 
more than 10’000 hours.
Thus, the useful life of the tubes is somewhat unpredictable. Rather than replacing the 
tubes arbitrarily after 5’000 hours, we suggest that you identify the signs of ageing:

→  Distortion gently increases to an audible level
→  Presence of clicks (dry, brief noises, like dead wood snapping)
→  Presence of pops, brief noises in the low frequencies
→  Presence of hiss, higher background noise
→  Reduction of spaciousness, loss of naturalness

As soon as one of these signs appears, please contact your Nagra dealer to order an 
HD DAC X replacement tube kit.

HD DAC X software update

The update is carried out with two MicroSD memory cards, one for the audio device 
and one for the power supply. You will be advised of the availability of any updates by 
your dealer who will install them.

Case cleaning

Clean the HD DAC X casing by using a soft, non-fluffy, slightly damp cloth. Do not use 
any cleaning products that could have a corrosive effect.

Disposal of old electrical & electronic equipment (Applicable in the European Union and other 

European countries with separate collection systems). This symbol on the product or on its packaging 

indicates that it should be handed over to the applicable collection point for the recycling of electrical 

and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent 

potential negative consequences for the environment and human health. The recycling of materials 

will help to conserve natural resources. For more detailed information about recycling of this product, 

please contact your local authority, your household waste disposal service or the shop where you 

purchased the product.
Applicable to the following devices: HD DAC X and all the package contents

03

NAGRA

 

HD DAC X // OPRERATION //

 

028 + 029

Summary of Contents for HD DAC X

































Reviews: