17
The following table shows the list of names directly available:
AES
C SPDIF
INPUT B
OPTICAL
TUNER 2
ANALOG
DAT
INPUT C
RCA
TV
A RCA
D RCA
INPUT D
SACD
VCR
AUX
D SPDIF
INPUT E
SACD 1
VCR 1
AUX 1
DVD
INPUT F
SACD 2
VCR 2
AUX 2
DVD 1
INPUT G
SPDIF
XLR
A XLR
DVD 2
LD
TAPE
B RCA
E OPTICAL
LD 1
TAPE 1
B SPDIF
E TOSLINK
LD 2
TAPE 2
CD 1
F AES
ND
TOSLINK
CD 2
F XLR
NAGRA D
TUNER
C RCA
INPUT A
NAGRA V
TUNER 1
3.2.2 FRONT PANEL.
The
FRONT PANEL
menu gives access to adjust several parameters concerning the
LCD display and the LEDS.
The
LCD
display can be set to
BLANKING
ON
or
OFF
. If it is set to ON and in the
mean time any key was pressed, the backlight of the display turns OFF after 3 seconds. If
any key is pressed, it turns on again for 3 seconds.
The
BACKLIGHT
intensity can be adjusted in a range from 20 to 100 %.
The
CONTRAST
can be adjusted in a range from 30 to 100 %.
The
LEDS
can be set to
BLANKING ON
or
OFF
. If it is set to ON and in the mean
time any key was pressed, all led’s will turn OFF after 3 seconds.. If any key is pressed
they turn ON again for 3 seconds. The LED’s on the main panel cannot be blanked.
The brightness
INTENSITY
can be adjusted in a range of 20 to 100 %.
The
MODULO MODE
can be set to
ROW
,
DOT
or
OFF
. When set to
ROW
, the
more sound level at the input, the more
LEDS
are turning ON. When set to
DOT
, only
one LED is moving on the modulometer scale. When set to
OFF
, no LEDS on the
modulometer will turn ON.
The
MODULO SENSE
menu gives the possibility to select the source signal for the
modulometers. When set to
DIG
, the modulometers are showing the present digital
LCD
FRONT PANEL
BLANKING : OFF
BACKLIGHT : 85 %
CONTRAST : 70 %
BLANKING : OFF
LEDS
INTENSITY : 80 %
MODULO MODE : ROW
MODULO SENSE: DIG
CORRECTION: NONE