Nagel CITOBORMA 111, Operating Instructions Manual

Page: 19 / 60

19
Operation
Switch machine on at the On/Off switch (1).
Insert the paper to be perforated between the two lateral stops (5) and fix
in position using knurled screw (6).
Push paper drill through the pile with an even movement and move up
again. Do not leave drill in the paper an unnecessarily long time, or it may
overheat.
Faults
Fault Remedy
Machine not running: Plug in mains plug,
switch on main switch
Ragged holes: Replace blunt drill,
replace drilling base
Hand lever hard to move,
drills break: Replace blunt drill,
replace drilling base
Drills block,
drills squeak: Perforate waxed paper
Bottom sheets not perforated: Adjust drilling depth downwards
If faults are not eliminated by these instructions, please contact your Nagel
dealer.
Technical data
Noise emission:
< 70 dB (A)
Power supply: see rating plate
Drill diameter: 2 - 9 mm
1 Max. pile depth: 50 mm
2