Nagel CITOBORMA 111, Operating Instructions Manual

Page: 17 / 60

17
Setting up
Set up machine on a firm, level surface facing the operator and plug in the
mains plug.
Fit sliding platform
Push sliding platform from the front onto the foot of the drilling machine
stand. To do so, push the screw on the underside of the sliding platform
into the slit of the foot of the stand.
Push the sliding table backwards until the longitudinal holes are over the
tap holes of the foot of the stand and tighten the knurled screws (15) from
above.
Insert drilling base (9) in the recess of the sliding platform.
Mount hand lever
Screw in hand lever (14).
Inserting paper drill
Insert paper drill into the drilling spindle (11) up to the stop and tighten up
with the Allan key (18).