© Ernst Nagel GmbH 9965242 User Manual 2S Trimmer en.doc Rev.1.0. 16.11.2010
21
6. Cleaning / Maintenance
6.1 General
6.2 Cleaning the belts
The belts of the 2S Trimmer need to be cleaned regularly during normal conditions even if the 2S
Trimmer has not been used for a while. How often this should be done depends on the paper type and
print quality.
An increasing number of jams is an indication of the need to clean the belts.
Fig. 1
Fig. 2
Fig. 3
Step Action
Remarks
1.
Cover reflection sticker.
Take a paper (A) and put it between the Trim Drawer
and close the Trim Drawer (Fig. 1 & 2).
The Knife blocks will automatically move out of
each other to make space for cleaning the belts.
2.
Open the Top Cover.
(Fig. 3)
3.
Turn off the 2S Tr
(Continue next page)
Before Cleaning or Maintenance, always make sure to disconnect the appropriate power cord.
An increasing number of jams is an indication of the need to clean the belts.
The exterior can be cleaned with a slightly moist cloth.
With exception of the belts, the interior of the 2S Trimmer does not need cleaning.
Clean the belts with water and a lint free cloth.
A
