© Ernst Nagel GmbH 9965242 User Manual 2S Trimmer en.doc Rev.1.0. 16.11.2010
14
4. Operating the 2S Trimmer
(continued)
4.7 Side Trim ON / OFF
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Step Action
Remarks
1.
Side Trim ON/OFF
Use the ‘
▲
/
▼
’ buttons on the UI to select ‘Side Trim’
and press the ‘Enter’ button (Fig. 1).
2. Adjust
‘Side
Trim’
Use the ‘
+ / -
‘ buttons to select ON/OFF
3.
Adjust ‘Finished Size’
Use the ‘
▲
/
▼
’ buttons (Fig. 3) to select ‘Finished Size’
and use the ‘
+ / -
‘ buttons to adjust the ‘Finished Size’.
Press ‘Enter’ (Fig. 3) to confirm the settings.
4.
Save settings.
After all desired settings are adjusted press ‘Jobs’
(Fig. 4) and press ‘Enter’ (Fig. 5) to save the settings.
Attention: A “Saving Job” signal appears for a
few
seconds.
