manualshive.com logo in svg

Nagasoft NSCaster X1, User Manual, Page: 7 / 28

Share
Download
Nagasoft NSCaster X1 User Manual Download Page 7

5

2 Installation and Commissioning

1) Open the box, then take out the power cord and NSCaster-X1 device. After that, lay the device

on a stable surface.

2) Connect the power cord and the corresponding WIFI and 4G antennas. Then, use a network

cable to connect to the RJ45 Gigabit Ethernet port, or insert a 4G card.

3) Connect the output of the AV equipment (such as camera) to the NSCaster-X1 device input

interface.

The SDI/HDMI camera is connected to the SDI/HDMI input via SDI/HDMI cable as shown

below:

The mixer is connected to the TRS MIC input port through the TRS cable, or the XLR cable is

connected to the XLR input as shown below:

4) In order to connect the NSCaster-X1 device output port to the monitor, it has divided into

following categories:

The SDI monitor is connected to the SDI output via an SDI cable.

The HDMI monitor is connected to the HDMI output via HDMI cable.

5) Connect the sound output of the NSCaster-X1 device to an external device or monitor.

Connect to the TRS MIC output through the TRS cable, or connect to the XLR output

interface through the XLR cable as shown below:

Summary of Contents for NSCaster X1





























Reviews:

No comments