SNR-R7204
Router Hardware Installation Manual
- 10 -
3.5.2 Checking Cable Connection
Make sure that the optical-fiber cable and the cable match the ports.
Check whether the cables are bound correctly.
3.5.3 Checking the Power Source
Check whether the power line is well touched and complies with the security
requirements.
Open the switch of the power source and check whether the power module
works normally.
3.6 Connecting the Console Port
7204 router has one console port. Its attributes and usage method are described in this
section.
3.6.1 Connecting the Console Port
Its console port has a rate of 300bps to 115200bps and a standard RJ45 plug and the
parity check is an option for the console port. However, the console port has no
indicator.
Before configuring and monitoring the router, you must connect the console
port and the terminal (such as STAR-510G
+
) or PC’s serial port through specific
monitor cable and then run terminal imitation software (Windows super-terminal).
The
cable is provided according to the host.
The communication parameters of the
terminal serial port can be set to a rate of 9600bps, eight data bits, one stop bit, no
sum check bit and traffic control.
1. Connecting the console port of 7204 router and the computer:
The RJ45 connector of the console port is shown in the following figure. The RJ45 plug
corresponds to the RJ45 socket, whose pins can be aligned from left to right with the
value from 1 to 8.