SNR-R7204
Router Hardware Installation Manual
- 9 -
Installing the hull on the desk
Installing the hull on the cabinet
3.3.1 Installing the Hull on the Desk
7204 router can be directly put on the smooth and safe desk.
Note:
Do not put heavy things on the top of the router.
3.3.2 Installing the Hull on the Cabinet
The hull of the router is fixed on the cabinet through the brackets.
Note:
The previous example only describes how to install the router’s hull on one side of a
bracket. The installation on the other side of the bracket is same.
After the brackets are installed, install the router on the cabinet. See the following
figure:
3.4 Connecting the System and the Ground
GND of the router must be grounding. To guarantee the grounding of the system, the
GND port must be connected by to the ground by connecting a line through the
grounding column and the summary slot of the bracket.
3.5 Checking After Installation
3.5.1 Checking the Cabinet
Check whether outside power supply matches up with the switchboard of the
cabinet.
After the router is installed, check whether the front/reel cabinet doors can be
closed.
Make sure that the cabinet is so fixed that it cannot be removed or fall down.
Make sure that the router has been installed and fixed well in the cabinet and that
all cables are also fixed on the cabinet.