Nady Systems WA-120, Owner'S Manual

Page: 8 / 16

Then MIC input (3) can be used to connect a hard wire MIC.
The REC OUT (9) can be connected to a recording device or to the input
jack of a power amplifier to further amplify and enlarge the audio power.
For stereo to mono conversion of the signals, wire the connecting cord
as per the the following illustration:
Attention:
1. If feedback (howling sound) occurs, try first turning down the
treble control (8). If feedback still is present, try turning down the
volume (7) or repositioning the WA-120 with respect to the wired
or wireless mic being used.
2. Extend the antenna (1) fully whenever using the wireless micro-
phone to ensure optimum performance and maximum range.
Wiring Illustration
6