background image

12

Audio Power Output: 

20W maximum, 4 ohms

External AC Power: 

100~240VAC/50~60Hz 

 

(Universal Line Voltage Adaptor supplied)

AC Power consumption: 

40 VA

External DC Power: 

15VDC, 1200mA AC adapter

Internal Batteries: 

 8 “D” size alkaline batteries (SUM-1) or optional 

12V/1.2A (RB-120 Rechargeable Battery)

Input Sensitivity/ 

MIC/TS: -52dB  +/-2dB,  150-15KHz +/-3dB

Frequency Response: 

 MIC: -52dB  +/-2dB,  150-15KHz +/-3dB  

AUX: -18dB  +/-2dB,  100-15KHz  +/-3dB

T.H.D.: 1%

Inputs: 

Wireless Mic, Hardwired Mic and AUX line inputs

Tone Control Range: 

Treble:   +/-6dB  at 10KHz 

 

Bass: +/-6dB at 100 Hz 

LINE/REC output level: 

775mV at 1K Ohms 

Wireless Operating

Frequency Range: 

170-216MHz, FM (3E)

Wireless Operating

Distance: 

100 ft. typical, up to 200 ft. line of sight 

Dimension: 

8.3” X 10.6” X 5.4” (211 X 270 X 137mm) 

Weight: 

5.3 lbs. (2.4 Kg.)

SPECIFICATIONS

SERVICE

(U.S.) Should your Nady WA-120 require service, please contact the 

Nady Service Department via phone at (510) 652-2411 or e-mail at 

[email protected] for a Return Authorization (R/A) number and a 

service quote (if out of warranty). Make sure the R/A number is clearly 

marked on the outside of the package, cashier’s check or money order 

is enclosed (if not prepaid with a credit card), and ship the unit prepaid 

to: Nady Systems, Inc., Service Department, 6701 Shellmound Street, 

Emeryville, CA 94608. Include a brief description of the problems you are 

having.

(International) For service, please contact the Nady distributor in your 

country through the dealer from whom you purchased this product.

DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN 

BE DANGEROUS AND ALSO VOID THE WARRANTY

Summary of Contents for WA-120

















Reviews: