7
The
AUX input (3)
can be connected to a cassette or CD player or other
such sound source.
The
REC OUT (9)
can be connected to a recording device or to the input
jack of a power amplifier to further amplify and enlarge the audio power.
For stereo to mono conversion of the signals, wire the connecting cord as
per the the following illustration:
Attention
:
1. If feedback (howling sound) occurs, try first turning down the
treble control (8). If feedback still is present, try turning down the
volume (7) or repositioning the WA 120 with respect to the wired
or wireless mic being used.
2. Extend the antenna (1) fully whenever using the wireless micro-
phone to ensure optimum performance and maximum range.
Wiring Illustration
Transmitter Battery Charging Operation
The WA 120 has a port in the rear compartment for charging a single
9V
battery (13)
. This battery charger can be used whenever the WA 120 is
operated from AC power. If you are using rechargeables in your transmit-
ter you can replace them as necessary with freshly charged ones, even
during use. The discharged battery can immediately be put on charge.
The charging
LED indicator (10)
will light red whenever a battery is
taking a charge. When the battery is fully charged, the indicator will turn
green.
Attention: This battery charger (13) can only be used for NiCad or
Ni-MH rechargeables. Never use them for any other type of battery
under any circumstance as this can result in damage to your unit
and even danger from exploding batteries.
6
Stand Mounting the WA 120
The WA 120 can be mounted on
the optional MST-4B aluminum
tripod stand for convenient place-
ment in a higher position. Contact
your dealer or the Nady service
department. (See Page 12)
PO
WE
R
RF O
N
MIC
/TX
MIC
ECH
O
MIC
AUX
AUX
REC
OU
T
TRE
BLE
BAS
S
ON
WIRELESS
AMPLIFIE
R
POW
ER
RF ON
MIC/TS
MIC
ECHO
MIC
AUX
AUX
RECOUT
TREBL
E
BASS
ON
WIRELESS A
MPLIFIER
POWER AMPLIFIER
PORTABLE RECORDER
PORTABLE CASSETTE
RECORDER
PORTABLE CD PLAYER
Summary of Contents for WA-120
Page 2: ......