UH-4 HANDHELD TRANSMITTER
8
19
17
16
18
20
UB-4 BODYPACK TRANSMITTER
transmitters set up
The UB-4 transmitter requires a single 9V battery to operate. To open the battery compartment,
snap open the
BAtteRy dooR CoveR (21),
exposing the
BAtteRy holdeR (22)
. Insert a
fresh 9V battery according to the correct polarity as indicated on the transmitter body. Snap the
cover back onto the bodypack. Make sure the cover is secured completely. Fresh alkaline batteries
can last up to 10 hour of operation, but in order to ensure optimum performance, it is recommended
that the batteries should be replaced after 6-8 hours of use.
Input Connection and Input selector switches
The UB-4 is provided with a
3.5mm loCkIng jACk (23)
for connecting the audio input selected.
Connect either the
InstRUment CoRd (24),
or the
heAdwoRn mIC (25)
, or
lAvAlIeR mIC
(26)
as desired, according to the input selected.
(Note: Use only the input audio source as per the
setting selected by the Input Selector Switch or the audio will not be optimal- a muddy or distorted
sound may result.)
To secure the connection, turn the slip ring on the plug clockwise ti thread it on
the jack. To unplug, reverse the process. Slip the transmitter into a pocket or clip it onto you cloth
or instrument strap (if using the UB-4 as an instrument transmitter.)
