background image

15

Nady Systems, Inc. warrants to the original consumer purchaser that the above unit is free from any 

defects in material or workmanship for a period of one year from the date of original retail purchase. 

If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace 

the unit free of charge, subject to verification of the defect or malfunction upon return to Nady 

Systems.
To the extent permitted by law, any applicable implied warranties, including warranties of 

merchantability and fitness are hereby limited to one year from the date of purchase. Consequential 

or incidental damages resulting from a breach of any applicable express or implied warranties are 

hereby excluded. This warranty is in lieu of all other agreements and warranties, general or special, 

express or implied and no representative or person including a Nady dealer, agent, or employee 

is authorized to assume for us any other liability in connection with the sale or use of this Nady 

Systems’ product.
Whereas some states do not allow limitations on how long implied warranties last, and do not allow 

exclusion of incidental or consequential damages, the above limitations and exclusions may not 

apply to you. This warranty gives you specific legal rights and you may also have other rights which 

may vary from state to state.

this warranty is subject to the following conditions:

1) This system must have been purchased from an authorized Nady dealer and all warranty 

service must be performed by Nady’s service department. Any service not performed by Nady will 

automatically void this warranty.
2) Items not covered: physical damage resulting from improper handling of the unit in transit from 

the factory by the shipper (Nady Systems is not responsible for such damage and all such claims 

must be made against the shipping company by the consignee.); defects caused by normal wear of 

the product (expendable parts are typically connectors, cables, potentiometers, switches and similar 

components); damage or defects caused by abuse, neglect, accident, failure to connect or operate 

the unit in any way that does not comply with applicable technical or safety regulations, or improper 

repair, excessive heat or humidity, alteration or unreasonable use of the unit, causing cracks, broken 

cases/housings or parts; damage caused by leaking batteries; finish or appearance items; items 

damaged in shipment en route to Nady Systems, Inc. for repair. The warranty is null and void if any 

Nady serial number has been removed or defaced.

how to obtain service:

1) If factory service is required, you must contact our Service Department at (510) 652-2411 for 

a return authorization (R/A) number. Make sure the R/A number is clearly marked on the outside 

of your package. (Please note: if an R/A number is not included, our Shipping Department cannot 

accept your package.)
2) Send the unit back to Nady Systems, Inc., 6701 Shellmound Street, Emeryville, CA, 94608, 

freight pre-paid.You must include proof of date and place of purchase (i.e., photocopy of your bill of 

sale) or Nady cannot be responsible for repair or replacement. Nady Systems, Inc. will not repair, 

nor be held responsible, for any units returned without proper identification, return address, and RA 

number clearly marked on the package.
3) Per the above, Nady will perform all warranty service and return the unit to you at no charge. 

Nady Systems will inform the buyer if product sent in does not meet the terms of this warranty and 

will provide a quote for fixing the unit and/or shipping it back exclusively at the buyer’s expense.

ONE-YEAR LIMITED WARRANTY

Summary of Contents for U-41 QUAD

















Reviews: