(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411
or e-mail at [email protected].
(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased
this product.
S E R V I C E
FOR YOUR NADY AUDIO PRODUCT
NADY SYSTEMS, INC. •
6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
O P E R A T I O N
TECHNICAL DATA
100
90
80
70
60
50
40
30
20
20
70
100
200
500
1k
Hz
5k
10k
20k
40
SPL (dB)
Frequency (Hz)
FREQUENCY RESPONSE
(1) POWER ON/OFF SWITCH w/ internal LED
(2) AC POWER CORD IEC CONNECTOR w/ internal fuse holder
Connects to the AC power cable.
Fuse: 115VAC ~ 2A 250V 20mm glass tube
230VAC ~ 1A 250V 20mm glass tube
(3) AC SELECTOR SWITCH
Before plugging in the power cord, check to see that this switch is set to the proper
voltage for your area: ~115V (60Hz) or ~230V (50Hz).
Note: Units damaged due to powering up with the wrong voltage are not covered
under warranty.
(4) INPUTS
XLR balanced and 1/4" unbalanced inputs.
(5) OUTPUTS
XLR balanced and 1/4" unbalanced outputs. Level/Bass/Treble controls do not effect
these outputs.
(6) RCA LINE LEVEL INPUTS
(7) INPUT LEVEL SELECTOR
This button sets the attenuation of both XLR and 1/4" inputs to Mic or Line level. The
corresponding Red or Green LED indicator will light. The RCA inputs are unaffected by
this switch.
(8) PEAK LED
This LED lights red when the output signal is clipping. It is acceptable if the red LED
lights occasionally. If the red LED lights more than occasionally, you should turn down the
volume to avoid audible distortion and damage to the speaker.
Note: Speakers damaged due to clipping are not covered under warranty.
(9) LEVEL CONTROL
This controls the master volume.
(10) TREBLE EQ
(11) BASS EQ
(9)
(10)
(11)
(8)
(7)
(6)
(4)
(1)
(2)
(3)
(5)
11"
16.8"
9.8"
Front View
WALL MOUNTING
Back View
Bottom View
1” dia.
