manualshive.com logo in svg

NAD T 748, Owner'S Manual

Share
Download
NAD T 748 Owner'S Manual Download Page 38

AMPLIFIER SECTION

 

Power output Stereo Mode 

2 x 80 W (8 ohms within rated distortion)

 

IHF dynamic power; 8 ohms 

2 x 110 W

 

IHF dynamic power; 4 ohms 

2 x 160 W

 

Power output Surround Mode 

7 x 40 W

 

Total harmonic distortion at rated power 

<0.08 %

 

IM distortion at rated power 

<0.08 %

 

Damping factor, 8 ohms  

>60 

 

Input sensitivity and impedance  

250 mV/47 kohms

 

Frequency response 

±0.5 dB (ref. 1 kHz, 20 Hz – 20 kHz)

 

Signal/noise ratio 

>100 dB (ref. rated power at 8 ohms, A-WTD)

 

Signal/noise ratio 

>90 dB (ref. 1 W at 8 ohms, A-WTD)

 

TUNER SECTION

AM SECTION
 

Tuning range 

520 kHz -1710 kHz (120 V version, 10 kHz steps)

 

 

522 kHz -1620 kHz (230 V version, 9 kHz steps)

 

Usable sensitivity 

60 dBu

 

Signal/Noise ratio 

40 dB

 

 Total Harmonic Distortion 

<1.5 %

 

Loop sensitivity 20dB S/N 

60 dBu

FM SECTION
 

Tuning range 

87.50 MHz - 108.00 MHz

 

Usable sensitivity, MONO 

<10 dBu

 

S/N Ratio MONO 

65 dB

 

S/N Ratio STEREO 

60 dB

 

Total Harmonic Distortion, MONO 

0.25 %

 

Total Harmonic Distortion, STEREO 

0.5 %

 

Channel Separation 

30 dB

 

RDS decode sensitivity 

0.5 %

POWER CONSUMPTION

 

Idle power 

50 W 

 

Standby power 

<0.5 W 

PHYSICAL SPECIFICATIONS 

 

Unit Dimensions (W x H x D)  

435 x 167 x 397 mm (Gross)

 

 

17 ¹/₈ x 6 ⁵/₈   x 12 ¹³/₁₆ inches

 

Net Weight 

11.5 kg (25.3 lbs)

 

Shipping Weight  

14.0 kg (30.8 lbs)

* - Gross dimensions include feet, volume knob and extended speaker terminals.

Specifications are subject to change without notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest 
information about T 748.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & 

DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

Dolby and the double-D symbol are  registered trademarks of Dolby Laboratories.  

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

REFERENCE

SPECIFICATIONS

38

ENGLISH

POR

TUGUÊS

FR

ANÇ

AIS

ESP
AÑOL

IT

ALIANO

DEUT

SCH

NEDERL

ANDS

SVENSK

A

РУ

ССКИЙ

Summary of Contents for T 748









































Reviews:

No comments

Brands by name

Popular brands

Load more brands