NAD T 748 Owner'S Manual Download Page 15

DOLBY PRO LOGIC IIx 

Dolby Pro Logic Iix processes both stereo and 5.1 signals into a 6.1 or 7.1 
channel output. At Dolby Pro Logic Iix, you can either choose PLIIx Movie or 
PLIIx Music mode to tailor your listening experience to the source material. 
Dolby Pro Logic Iix surround processing yields more stable imaging and 
full bandwidth sound to the rear channels in Movie mode offering sound 
that is more similar to Dolby Digital decoding. For two channel signals, 
PLIIx Music mode also features three additional user controls – Dimension, 
Center Width, and Panorama. See also section about “Adjusting Listening 
Modes” below.

The following chart shows the channels available assuming they are 
enabled in the “Speaker Configuration” menu:

Listening Mode

Two-Channel 

Sources

Active Decoded Output Channels
6.1 Speaker System

7.1 Speaker System

PLIIx Music

PLIIx Movie

Front (left and right), Center, 

Surround (left and right), Back 

Surround, Subwoofer

Front (left and right), 

Center, Surround 

(left and right), Back 

Surround (left and 

right), Subwoofer

NEO: 6

Two-channel recordings, whether stereo or surround-encoded, are 
reproduced with NEO:6 surround with output to front left/right, center and 
discrete left/right surround channels plus subwoofer (assuming these are 
present in the current “Speaker Configuration”). The T 748 provides two DTS 
NEO:6 variations – NEO:6 Cinema and NEO:6 Music. See also section about 
“Adjusting Listening Modes” below.

EARS

Two-channel recordings, whether stereo or surround-encoded, are 
reproduced with proprietary NAD surround processing with signal output 
to the front left/right, center and discrete left/right surround channels, 
plus subwoofer (assuming these are present in the current “Speaker 
Configuration”). EARS does not employ the surround back speakers (if any). 

EARS extracts the natural ambience present in nearly all well-produced 
stereo recordings. It does not synthesize any ambience or other sonic 
elements and thus remains truer to the sound of the original musical 
performance than most other music-surround options.

Select EARS for listening to stereo music recordings and broadcasts. 
EARS produces a subtle but highly natural and believable ambience from 
nearly all “natural-acoustic” stereo recordings. Typically, these include 
classical, jazz, and folk genres as well as numerous examples from others. 
Its virtues include realistic, stable “front-stage” sonic imaging and spacious 
but unexaggerated ambient “virtual acoustics” that remain faithful to the 
original recording.

ENHANCED STEREO

All recordings are reproduced in stereo via the maximum speaker 
complement configured in the current “Speaker Configuration”. Enhanced 
stereo can be useful for maximum volume from all channels or for multi-
speaker background music (cocktail party) listening. For this mode, Front, 
Center, Surround and Back speakers can be turned ON/OFF as desired.

ANALOG BYPASS

All analog signals remain in the analog domain without analog-to-digital 
conversions. At Analog Bypass, the DSP circuitry is bypassed but full tone 
control functions remain. “Bass management” or Speaker settings are also 
not in effect as these are DSP functions. 

ADJUSTING LISTENING MODES

Several of the T 748’s listening modes have one or more selectable 
variations and adjustable parameters that you can modify to suit 
your system or personal preferences. At Listening Mode menu, use a 
combination of [ 

D/F

 ] keys to navigate and achieve desired settings. 

NOTE

 

Listening Mode parameter changes are maintained when you change 
listening modes. You may also save a modified Listening Mode for easy 
recall by saving it to a Preset (See “A/V Presets Setup” below under Setup 
Menu discussions).

PRO LOGIC IIx

PLIIx MOVIE

 is optimized for film soundtracks.

PLIIx MUSIC

 for music recordings.

Center Width (0 to 7):

 Modifies the “hard-centeredness” of the center 

image, by gradually mixing mono center content to the Front left/right 
speakers as well. A setting of “0” retains the center-channel-only default 
while a setting of “7” yields a fully phantom center channel.

Dimension (-3 to 3):

 Adjusts front-rear emphasis of the surround effect 

independently from the relative channel levels. 

Panorama (On/Off):

 Adds a “wraparound” effect by extending some 

stereo content into the surround channels.

NOTE

 

Pro Logic IIx mode will decode as Pro Logic II mode when the BACK 
surround speakers are set to “Off” from “Speaker Configuration” menu. 
See also section about “Speaker Configuration” under “Speaker Setup” of 
the Setup Menu.

DTS NEO: 6

NEO:6 Cinema

 is optimized for film soundtracks.

NEO:6 Music

 for music recordings

Center Gain (0 to 0.5):

 Adjust for better center image in relation to the 

surround sound channels.

OPERATION

USING THE T 748 - MAIN MENU

15

ENGLISH

POR

TUGUÊS

FR

ANÇ

AIS

ESP

AÑOL

IT

ALIANO

DEUT

SCH

NEDERL

ANDS

SVENSK

A

РУ

ССКИЙ

Summary of Contents for T 748









































Reviews: