UNPACKING AND SETUP
WHAT’S IN THE BOX
Packed with your D 1050 you will find:
·
Switch mode power supply (SMPS) with 4 sets of interchangeable plugs
•
Four pieces of dome-shaped feet
•
Quick Setup Guide
SAVE THE PACKAGING
Please save the box and all the packaging in which your D 1050 arrived.
Should you move or otherwise need to transport your D 1050, this is by
far the safest container in which to do so. We’ve seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!
QUICK SETUP
This simple guide will help you get started with your D 1050.
Place the D 1050 on a firm, level surface. Do not place the unit on a soft
surface like a carpet.
Make all the connections to your D 1050 with the unit unplugged from
the mains power source. It is also advisable to power down or unplug all
associated components while making or breaking any signal or AC power
connections.
1
Using applicable connectors (not supplied), connect source devices to
corresponding input sockets of D 1050.
S/PDIF sources
$
COAXIAL 1, COAXIAL 2, OPTICAL 1, OPTICAL 2
USB device
$
USB
2
Using applicable connectors (not supplied), connect the 2 CHANNEL
AUDIO OUT ports, UNBALANCED and/or BALANCED, to the
corresponding audio input sockets of other devices like receivers,
amplifiers, audio processors or music system.
3
Connect corresponding end of the Switch Mode Power Supply (SMPS)
to the 5V DC IN of D 1050 and then connect the SMPS plug to a mains
power source.
4
With the device your D 1050 hooked up and applicable sources all
powered up, press
(Standby) to switch ON the D 1050 from standby
mode.
5
Start listening to your preferred Source by repeatedly pressing “
S
” to
cycle through the Sources (COAXIAL 1, COAXIAL 2, OPTICAL 1, OPTICAL
2 and USB) and select desired Source. Adjust audio level via the volume
control of the device that D 1050 is hooked up.
INTRODUCTION
GETTING STARTED
4
ENGLISH
POR
TUGUÊS
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
