ENGLISH
SPECIFICATIONS
17
All specs are measured according to IHF 202 CEA 490-AR-2008 standard. THD is measured using AP AUX 0025 passive filter and AES 17 active filter.
GENERAL SPECIFICATIONS
LINE INPUT, SPEAKER OUT
Continuous output power into 8 ohms
>150 W (all channels driven)
>180 W (two channels driven)
Continuous output power into 4 ohms
>180 W (all channels driven)
>300 W (two channels driven)
Continuous output power into 8 ohms at Bridged mode
>280 W (all channels driven)
>500 W (two channels driven)
THD (20 Hz – 20 kHz)
<0.02 % (1 W to 120 W, 8 ohms and 4 ohms)
Signal-to-Noise Ratio
>90 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
Clipping power (All channels driven)
>160 W (1 kHz 8 ohms 0.1 % THD)
>200 W (1 kHz 4 ohms 0.1 % THD)
Clipping power into 8 ohms at Bridged mode
>300 W (1 kHz 0.1 % THD - all channels driven)
>550 W (1 kHz 0.1 % THD - two channels driven)
IHF dynamic power (all channels driven)
8 ohms: 180 W
4 ohms: 280 W
2 ohms: 360 W
IHF dynamic power (two channels driven)
8 ohms: 200 W
4 ohms: 360 W
2 ohms: 600 W
IHF dynamic power (Bridged mode, all channels driven)
8 ohms: 520 W
4 ohms: 670 W
IHF dynamic power (Bridged mode, two channels driven)
8 ohms: 600 W
4 ohms: 800 W
Peak output current
>26 A (1 ohm, 1 ms)
Damping factor
>150 (ref. 8 ohms, 20 Hz to 6.5 kHz)
Frequency response
±0.5 dB (20 Hz - 20 kHz)
Channel separation
>75 dB (1 kHz)
>65 dB (10 kHz)
Maximum undistorted input level
3300 mV
Input sensitivity (for 150 W in 8 ohms, maximum volume)
1450 mV
Analog Input audio sense threshold (one channel with signal)
3 ± 0.5 mVrms (ref. 100 Hz - 10 kHz)
Trigger IN level
3 - 30 Vdc
Standby power
0.5 W
DIMENSION AND WEIGHT
Gross dimensions (W x H x D)*
483 x 90 x 435 mm
19 1/16 x 3 9/16 x 17 3/16 inches
Shipping weight
17.6 kg (38.8 lbs)
* - Gross dimension includes extended rear panel terminals and excludes installed feet
Specifications are subject to change without notice. Check out www.NADelectronics.com for updated documentation or latest information about CI 8-150.
