ENGLISH
18
VOLUME DISPLAY MODE
Volume Display Mode gives the user two options on how to display
Volume level. Use
a
or
s
to select between “Decibel” and “Percent” Volume
display mode.
VOLUME LIMITS
Volume limit allows the setting up of the upper and lower limit of the
volume control level. Modifying the upper or lower volume limits allows
more fidelity when adjusting the volume level.
ADJUSTING VOLUME LIMITS
While at VOLUME LIMITS menu, toggle ENTER to switch between Minimum
and Maximum Volume Limit options.
Minimum Volume Limit
Toggle or press and hold either navigation buttons
a
or
s
to adjust or
set up the Minimum Volume Limit between -80 dB and -30 dB.
Maximum Volume Limit
Toggle or press and hold either navigation buttons
a
or
s
to adjust or
set up the Maximum Volume Limit between 12 dB and -50 dB.
NOTES
C 389 maintains a minimum span width of 40 dB between Maximum
and Minimum Volume limits. For example, a maximum volume limit
configuration of - 10 dB limits the range of the minimum volume limit
adjustment from -80 dB to -40dB.
Conversely, a minimum volume limit configuration of -62 dB limits the
range of the maximum volume limit adjustment from 12 dB to -32 dB.
SOURCE SETUP
Source Setup has the following menu items:
•
Enable Source
•
Name
•
Volume Control
•
Auto Sense
•
Analog Bypass
•
Analog Gain
At Source Setup menu, select the particular Source you want to configure.
ENABLE SOURCE
One can enable/disable a Source via this option. This is particularly useful if
only few Sources are used thereby bypassing unused sources.
On:
Enable selected Source.
Off:
Disable selected Source.
NAME
A new Name maybe assigned to a Source label. For example, if your BD
player is attached to “Optical 1”, it is possible to rename “Optical 1”to “BD
Player”.
In order to rename the Source label, select “Name” parameter.
1
While at the selected Source, for example “Optical 1”, press ENTER to
select “EDIT”.
2
Use [
f/d
] to pick through the alphanumeric selections.
3
Press [
s
] to move to the next character and at the same time save the
changes done on the current character. The name can be as long as
fourteen characters.
4
Repeat steps 1 and 2 for each character in sequence.
5
Complete the renaming process by pressing [ENTER button again to
save the new source’s input name. The new Name will be shown in the
display.
OPERATION
USING C 389
