ENGLISH
13
IDENTIFICATION OF CONTROLS
SR 10 REMOTE CONTROL
TABLE OF LIBRARY CODES APPLICABLE TO SR 10 REMOTE CONTROL
LIBRARY CODE
PRODUCT DESCRIPTION
10
Default library for “AMP” page
11
Zone 2
12
Default library for “AMP” page without discrete ON/OFF (toggle ON/OFF) buttons
20
Default library for “CD” page; C 515BEE, C 545BEE, C 565BEE
21
T 535, T 585, M55, DVD section of L 54, VISO TWO, VISO FIVE
22
T 513, T 514, T 515, T 517
23
T587
30
Default library for “BLS” page
31
IPD 2
40
Default library for “AUX” page. Loaded with Tuner default codes. Applicable also to Tuner section
of C 725BEE, T 175, T 737,T 747, T 755, T 765, T 775, T 785
41
C 422, C 425
42
C 445
50
DAC
IMPORTANT
The SR 10 may not necessarily contain all the control buttons applicable for the above-mentioned
NAD products. Use the prescribed remote control of the specific NAD product for a full complement
of applicable remote control buttons.
RESET SR 10 TO ITS FACTORY DEFAULT SETTINGS
The SR 10 remote control can be restored to its factory default settings (including default libraries) by
the following procedures.
1
Press and hold
ON
and buttons.
2
As soon as
AMP
device button lights up, release hold of both
ON
and buttons.
3
If the
CD
device button flashes twice, the SR 10 factory reset is completed.
