Max. 3 in. (76 mm)
Max. 3 in.
(76 mm)
•
WARMING
FIXATION OF AUTOMATIC SWITCH
TO THE DOOR
// // // // // // // // // // // // // //
5
This switch is designed for virtually universal
installation on any kind of door. It is composed of
two pieces, the switch and magnetic trigger.
Choosing the appropriate location
Make sure nothing interferes with the function-
ning of the system.
Step 1 - Securing switch
Secure switch to the wall above the
door (figure 1 ) or to the floor ( figure 2 ).
It is important to choose a location where the
switch will not interfere with the functionning of
the door.
Step 2 - Secure magnetic trigger
Attach magnetic trigger in either position in such
a way as to be maximum 3 inches (76 mm) from
the switch.
The trigger can be attached to the door different
ways. (figure 1, 2 ).
Step 3 - Connect switch wires
to cable from
control panel and confirm switch is functionning
properly.
Switch
Magnetic trigger
Figure 1
Figure 2
The installation, repair and maintenance of
the control panel must be performed by an
authorized qualied technician
by vertue of law .
Before opening the access panel, make sure the
power supply is in the “OFF” position.
•