![Nacra F16 Assembly Manual Download Page 31](http://html2.mh-extra.com/html/nacra/f16/f16_assembly-manual_3096404031.webp)
NACRA EMPOWERING SAILORS SINS 1975
5.2 Raising the Jib
lift
pull
2.
Raise the jib until the S-hook is pulled through
the ring.
3.
Gently pull the jib down to lock the S-hook in
the ring.
1.
Hook the jib on the S-hook. Close the
zipper while raising , with the jibhalyard
zipped in with the jibhalyard in between.
4.
Feed the jibdownhall line through the 16mm-
block located on the starboard side next to the
compression pole. Go through the ring on the
tack of the sail and loop around the pole in or-
der to tie it around the ouholderbase.
5.
Attach the jibsheet small to the
clew of the sail
Note: the jibdownhall is
only standard on the
1.
To lower the jib release the jibdownhall and the
jibsheet small.
2.
Raise the jib a bit and pull on the other line,
while keeping tension on both lines, in order to
unlock the S-hook of the ring
5.3 Lowering the jib