S
AFETY INSTRUCTIONS
Every electrical device must be used for its particular function only, respecting the manufacturer’s
instructions. Failure to adhere to these instructions could result in serious bodily injury to the operator
(shock,electrocution,etc.). Please read the following safety instructions carefully and ensure that you
understand them prior to using the machine.
•
Before putting the machine’s plug in the wall socket, check that the voltage available is the same
indicated
on the label of the machine.
•
Be sure that the electrical system is well grounded and that it has a GFI.
•
Verify that the cable plug is the same as the outlet.
•
Do not use adapters or multiple sockets
•
If any electrical extension is used, ensure it is the correct gauge of wire and make sure it is
watertight.
•
Take care of the electrical cable. Do not repair the cable in case of tears, but replace it with a new
one.
•
Do not pull the cable to drag the machine or to pull the plug out. Pull the plug out only when the
machine is
switched off.
•
Do not handle the plug with wet hands.
•
Do not spray water near electrical outlets. Do not use the machine to spray or to suck dust,
corrosive
liquids (acids or bases) and explosive or flammable liquids.
•
Do not use the machine in an explosive atmosphere.
•
Do not let the machine be used by children and people unable to understand the danger
connected with
the use of electrical power.
•
In case of abnormal working (very noisy motor, pump not running, extreme temperature rise,
or other
suspicious signals) switch off the machine and pull the plug out.
•
After using, store the machine, well cleaned, in a cool and dry place.
Attention:
All electrical repairs must be performed by qualified personal only!
2
