5
MACHINE PREPARATION
PREPARING THE MACHINE FOR FIRST USE
Upon delivery of the machine, please ensure that the owner’s manual is read thoroughly. If there
is multiple users for the machine, ensure that they have a full understanding of how to use the
machine in a safe manner.
WATER TANK ASSEMBLY
Put the handle in vertical position, lift up the bracket (A).
Insert the tank (B) so that it is secured to the inner part of
the bracket (C). Lower bracket (A) until it locks in to the
tank. Lock the top bracket in place using the locking nut
(G). Connect the Solution hose (D) to both, the bottom
tank valve (E) and to the machine base (F).
Fill the tank with detergent solution keeping the handle in
vertical position.
The detergent solution should not exceed the temperature
of 50 °C and the detergent must be diluted to the
manufacturers specifications.
WARNING:
•
Do not use pure acids
•
Do not mix detergents or acids of different
origins.
BRUSH/PAD DRIVER ASSEMBLY
WARNING:
When installing the pad driver/brush by hand,
ensure that the power source is disconnected.
Installing the pad driver/brush with the machine
plugged in c
an
cause serious injury.
For automatic mounting, connect the machine to the
power source, lay the brush/pad driver on the floor (For
pad driver, there must be a pad on the pad driver), bring
the machine over the pad driver and lower it so the chuck
is in the centre of the pad driver. Lower the handle to the
operating position. Pull the lever (A) and lower the handle
to the operating position.
