Use with Accessories
In this mode the machine works as a classical extractor, for which you clean a surface by using
accessories, which are external to the machine body.
After filling the tanks with solution and inserting the plug in the wall outlet (see the Paragraph
Preparation for work), you need to perform the following operations:
1. Connect the machine to the wand or to the hand-tool using the solution and the vacuum
hoses. To connect the hoses to the machine, remove the vacuum hose, which connects the
upper tank to the vacuum head, and the solution hose, which connects the pump to the
spraying nozzle, situated under the machine. By doing so, the AVB4X becomes a classical
carpet extractor. At this point it is possible to connect the accessories to the machine, through
the special connecting hoses.
Vacuum hose
Solution hose
2. Switch the vacuum motor on by setting the switch position to "I", and the pump by setting the
switch position to "II". In this configuration, the solution pump is always working and it is not
necessary to keep the control lever pressed.
3.
To spray water you need to press the lever situated on the handle of the accessory.
7