IMPORTANT:
Before each use, it is necessary to regulate the pressure of the rotating brush. Pull the
dedicated knob and rotate, in order to regulate the pressure of brush on the hard floor or carpet
surface. If the brush is too aggressive on the carpet or hard floor surface, the motor may be
overloaded and the thermal protection will intervene, to avoid damage to the brush motor.
In this case, it is necessary to raise the brush.
The repeated intervene of the thermal protection may result in damage to the brush motor, which
cannot be covered by warranty. Therefore, it is important to adjust the pressure before each use.
Attention
: Do not use the machine as a vacuum cleaner!
Do not let the pump function without water! Check the level of water in the lower tank, while using the
machine. As soon as it becomes empty you must switch the machine off, empty the upper tank (which
then will be full) and fill the lower tank before turning the pump on again.
6
