2
Getting Started
MAKING CONNECTIONS
4 channel NVR shown. Identical configuration for 4/8 Channel NVR
1.
Connect the network cable from the back of the NVR to
Network switch or PoE switch.
(#1 in the image above)
2.
Connect a monitor to the NVR using either the VGA port
(#3 in
the image above)
or the HDMI port
(#2 in the image above)
and the
appropriate cable.
3.
Connect the included USB mouse to the rear USB port of the
NVR.
(#4 in the image above)
4.
Connect the included 12VDC power supply’s AC plug into an
appropriate AC power outlet which supplies between 110
and 120 volts AC. Then plug the power supply’s DC connector
into the NVR’s DC power input port.
(#5 in the image above)
NOTE:
An uninterruptable power supply is recommended
for the NVR and any power supplies for the cameras, both
to protect against damage from sudden power loss, and to
maintain video surveillance in the event of a power outage.
