North American Clutch & Driveline
Rockford, Illinois
Phone: (800) 383-9204
(815) 282-7960
Fax (815) 282-9160
www.naclutch.com
57
57
4. Remove the hex head capscrews (65) and remove the rear bearing retainer (64) from the
sheave housing if not previously removed.
5. Remove the hex head capscrews (48) that secure the sheave housing (60) to the clutch
housing (44) and remove the sheave housing if not previously removed.
Note: The inner race of bearing (41) will remain on the shaft.
1. Remove the sheave from the shaft.
2. Remove the outer race of bearing (41) from the sheave housing if not previously removed.
3. Remove the fitting (50) from the bearing retainer.
4. Remove the twelve hex head capscrews (35) and remove the front bearings (38) from the
clutch housing (44).
5. Lift clutch shaft (33) with the inner races of the front and rear bearings (40&41) from the
clutch housing.
6. Remove the outer race of the rear bearing (40) from the main housing.
7. Using a split-type bearing puller, remove the inner race of the rear bearing (41) from the shaft.
8. Using a split-type bearing puller, remove the inner race of the front bearing (40) from the shaft.
