Chapter 4 Preparations for installation
22
(2) Peel off about two-thirds of the first tape toward the left.
(3) After that, pull it toward the right in order to peel off the yellow portion of the second tape.
Check that the yellow portion is removed from the surface after the tape has been peeled off.
If you do not peel off the sealing tape, it may peel off later and enter the reduction gear. This may
cause deterioration of performance such as abnormal noise, vibration, or torque irregularity. Also,
this tape may adhere to the lip of the oil seal, causing leakage of the lubricant.
If a coating or degreasing agent other than those specified is used, the label tape may peel off and
enter the reduction gear. This may cause deterioration of performance such as abnormal noise,
vibration, or torque irregularity. Also, this tape may adhere to the lip of the oil seal, causing leakage
of the lubricant.
Fig. 4-12
Fig. 4-13
Note
