EN - 41 -
20. Remove the
door hang rails
(10)
from the appliance door. Screw the
adjustment bolts
(12)
to the holes on the appliance door by leaving the necessary space using
unit door
spacer
(11)
. (fig.N)
21. Open the appliance door. Place the
unit door
(15)
onto the appliance door inserting
adjustment bolts
(12)
into the slots on the door hang
(2)
. (fig.N)
22. Place the washers
(13)
and screw the
nuts
(14)
onto the
adjustment bolts
(12)
. (fig.N)
23. 1~2 mm gap between the unit itself and unit door is vital for appliance performance.
Close the door and make the accurate adjustment of the
unit door
(15)
by screwing or
unscrewing the
adjustment bolts
(12)
for vertical adjustment and by the help of the slots
on the
door hang
(2)
for other directions. (fig.P1)
24. Place the
door bottom fixings
(5)
to the bottom of the appliance door between the
appliance door and
unit door
(15)
. Screw the
door bottom fixings
(5)
to the appliance door
with
screws
(6)
. (fig.O)
25. Screw the
door bottom fixings
(5)
to the
unit door
(15)
by
screws
(7)
. (fig.O)
26. For the adjustment of the space between the
unit upper door
(15)
and the unit itself, you
can unscrew the
screws
(6)
then adjust the space between the
appliance upper door
(19)
and
unit upper door
(15)
by the spring effect of the
door bottom fixings
(5)
while screwing
back the
screws
(6)
.
27. Slide the
hang cover
(3)
onto the
door hang
(2)
. (fig.P2)
Summary of Contents for KI 1235
