NABO DAB EASY, Operating Manual

Page: 61 / 120

61 DAB Easy
E
> Plug the headphone plug into the headphone jack. (11) on the
back of the device. The sound is now solely played via the head
phones; the loudspeaker is muted.
> If you want the sound to be played by the speakers again, unplug
the headphone plug from the headphone jack on the device.
5.2.5
.
Switching on the device
To ensure a good DAB+/FM(UKW) signal, completely pull out the
antenna located on the back of the device. Please note section 5.2.3
on this matter.
First prepare the radio for operation as described in section 5.2.
> Press the
Standby button (7)
to switch on the radio. After
switching on for the first time, you must first set the [Language].
To do so, select one of the available languages with the
<Tune or
Tune> buttons and confirm your selection by pressing the Select
button
. The device then automatically performs a complete search
in DAB mode. During the search, the progress and the number
of digital radio stations found are displayed. The first DAB+ pro-
gramme is played after the station search has been completed.
5.2.6. Switching off the device
When connected to the power:
> Press and hold the Standby button (7) to switch the unit to
Standby mode. The message [Standby] appears briefly on the
display. The time and date are displayed. You can change the
display brightness in standby mode as described in section 9.4.
In battery mode:
> In battery mode, the device is always switched off by holding
down the
standby button (7)
. The display briefly displays the
information [Power off]. The time and date are not shown. The
standby mode is not available in battery mode.
5.2.7. Switching DAB+/FM mode
> Press the MODE button (1) briefly to switch between DAB+
(Digital Radio) and FM (UKW).
5. OPERATION AND FIRST USE