3 of 34
www.NabcoEntrances.com
GT208300-8350OverheadConcealedOperatorInstallationManual
Rev 8-31-16
P/N C-00183
CHAPTER 1: WARNING LABELS
Warning labels are universal and used to alert an individual of potential harm to one’s self or to others. The following warning labels are
listed in a hierarchy order that defines the most potential danger first, and the least potential danger last. Please refer to this page in the
event that a warning label is displayed within this manual and further definition needs to be explained.
Indicates potentially dangerous situations . Danger is used when there is a hazardous situation
where there is a
high
probability of severe injury or death . It should not be considered for property
damage unless personal injury risk is present .
Indicates a hazardous situation which has
some
probability of severe injury . It should not be
considered for property damage unless personal injury risk is present .
Indicates a hazardous situation which
may result in a minor injury
. Caution should not be used
when there is a possibility of serious injury . Caution should not be considered for property damage
accidents unless a personal injury risk is present .
Attention: A situation where material could be damaged or the function impaired .
Notice: Indicates a statement of company policy as the message relates to the personal safety or protection of
property . Notice should not be used when there is a hazardous situation or personal risk .
Note: Indicates important information that provides further instruction.
CHAPTER 2: GENERAL SAFETY RECOMMENDATIONS
According UL 325 8 .4, Do Not mount Operator onto flammable surfaces!
Do not place finger or uninsulated tools inside the electrical controller . Touching wires or other
parts inside the enclosure may cause electrical shock, serious injury or death .
Read this “General Safety Recommendations” section before installing, operating or servicing
the automatic door . Failure to follow these practices may result in serious consequences . If you do
not understand the instruction, ask the installing qualified technician to teach you how to use the
door .
Do not install, operate or service this product unless you have read and understand the General
Safety Recommendations, Warning Labels, Installation and Operating Instructions contained in this
manual . Failure to do so may result in bodily injury, or property damage .
If the door appears broken or does not seem to work correctly, it should be immediately removed
from service until repairs can be carried out or a qualified service technician is contacted for
corrective action .
The GT20 Swing Door Operator Assembly must not be mounted within locations presenting
explosion hazards . The presence of flammable gases or smoke represents a considerable safety
hazard .
Attention: Any modifications of the installation that are not described in this manual are not approved by
the manufacturer .
Notice: This Manual, the User’s Guide Manual, and all other associated manuals, must be given to and retained
by the purchasing facility or end user .
►
►
When configuring the installation, it is essential to make sure local regulations are complied. It is particularly important
to ensure Door Panels do not have any sharp edges. The secondary closing edges must be designed by customers in
such a fashion as to eliminate any dangerous crushing and shearing points.
►
►
Application limits must be observed.
DANGER
WARNING
CAUTION
DANGER
DANGER
WARNING
WARNING
WARNING
WARNING