NA OMEGA +, User Manual

Page: 10 / 22

Omega Dimmer series User manual version 1.0 09.2011 10
red yellow blue black green/yellow
Phase L1 Phase L2 Phase L3 neutral earth
Complete DMX cable plug
Connect the DMX input/output sockets on the back of the hull
Starting the system
Check incoming power cords
Check the incoming wires are connected properly and securely tightened,
Check whether the wires have the correct contact sockets.
Using a multimeter check the short circuit between phases, neutral and earth.
Check power cords
Make sure all cables are properly connected and isolated and complies with both ends of
the connection.
Make sure all ground wires are connected properly.
Using a multimeter check short circuit between phases, neutral and earth
.
Turning on
Turn off all circuit breakers.
Turn on the main switch of sufficient capacity fuse.
Make sure the LED indicators show the proper interconnection.
Management screen, main menu appears with all the channels.
Channel output check
a) Push the menu button,
b) with [up]/[down] direction buttons find [Test], [enter] (with menu button),
c) 1st channle is blinking, roll encoder, 1st column rise a level up,
d) with [LEFT]/[RIGHT] direction buttons change the channels.
Unplug power before service.
Always use the same type of parts for service.