14
peratures and impacts. Also protect
the motor unit from wet conditions and
persistent moisture.
■
Do not place or lay any heavy objects on
the device or the connecting cable.
BEFORE INITIAL USE
There may still be some production residues
on the device. To avoid harmful effects to
your health, clean the accessories thorough-
ly before using them for the first time (see
the "Cleaning and Storage" chapter).
USE
Please Note!
■
Inspect the device for damage each
time before you use it. Only use it if it
is undamaged and has been correctly
assembled!
■
Never place the motor unit on a soft
surface. The ventilation openings on the
bottom of the motor unit must not be
covered.
■
Never insert the blade attachment into
the motor unit without a shaker.
■
Do not move the device during opera-
tion. Ensure sufficient stability and hold
the device firmly.
■
Do not detach the shaker from the motor
unit during operation. Before detaching
it, switch off the device and wait until the
blades have come to a standstill.
■
The device is not suitable for constant
operation. Operate the cross-blade
attachment for no more than approx.
1 minute and the flat-blade attachment
for no more than approx. 30 seconds
without interruption to prevent the motor
from overheating. Then allow the device
to cool down for a few minutes before it
is switched on again.
L
We recommend also adding a little
liquid to the mixing container when
you want to process frozen ingredi-
ents.
1.
Place the motor unit (
2
) on a kitchen unit
or another dry, flat and stable surface.
2. Fully unwind the connecting cable and
connect it to a plug socket.
3.
Select a shaker (
1
or
3
) and add the
ingredients you want. When you do this,
do not exceed the
maximum fill level
(marking on the shakers)!
4. Select a blade attachment:
○
The
flatblade attachment
(
4
) is
intended to be used for grinding hard
and dry foodstuffs such as nuts,
Parmesan cheese or coffee beans. It is
not suitable for liquids
!
○
The
crossblade attachment
(
8
) is in-
tended to be used for chopping up ice
cubes, fruit, vegetables, herbs and for
blending, whipping and stirring drinks
and creams.
5. Screw the blade attachment clockwise
onto the shaker.
IMPORTANT
: The
plastic housing of the blade attach
ment contains a sealing ring. This
ensures that the shaker does not leak.
Make sure that the sealing ring is cor
rectly inserted in the groove!
6. Turn the shaker upside down and place
the blade attachment into the motor
unit. The three locking lugs on the
shaker must be placed in the matching
recesses in the motor unit.
7. To switch on the device, hold the motor
unit securely with one hand and use your
other hand to rotate the shaker as far as
it will go clockwise.
8. To switch it off, turn the shaker anti-
clockwise.
9. Wait until the blades have come to a
complete standstill. Then remove the
shaker.
