Newtons4th Ltd
www.newtons4th.com
Page 3 of 5
Now press the SLM button to enter the
SLM mode and again to see the default
mode settings as shown here.
Pressing the SLM button again or the
HOME button will return to the SLM
screen.
Pressing the START key will now start a
sweep with the steps and frequency range
that were entered in the frequency sweep
menu.
Within the resolution of the sweep steps,
the two largest signal components will be
marked with cursors and quantified in the
left axes.
Having identified the largest signals, the
frequency 1 and frequency 2 values within
the SLM option screen will be updated.
In this case, it is clear that the sweep is
successful and we can go straight to an
SLM scan.
If the desired signals are not detected, the
frequency range, number of sweep steps
or selectivity can be adjusted.
