(Revised 2011-07-21)
Page 67 of 158
Bridging – Multicast Addresses
The Multicast Addresses tab under the Bridging category will display a list of Multicast Group Addresses
that are associated with respective port numbers. This may be used to statically assign a Multicast Group
Address access to a group of ports on the switch.
Following the Add button on the page above, the administrator must enter a valid Multicast Group Address
and associate it with a port number or list on the switch. Once the administrator clicks on the Add button,
the changes will take effect instantly.
Note:
If there are multiple ports on different VLANs, the N-Tron switch will apply the static multicast
address to the lowest VLAN-ID that is associated with one of the ports assigned to the static
multicast address. So if the lowest VLAN-ID contains all the ports assigned to the static multicast
address (an umbrella VLAN), it will function for all those ports with no problems. This can be
achieved with overlapping VLANs.
Summary of Contents for 7506GX2 Series
