manualshive.com logo in svg

N-Tron 708M12, User Manual & Installation Manual, Page: 148 / 169

Share
Download
N-Tron 708M12 User Manual & Installation Manual Download Page 148

(Revised 2012-10-5)                                                                                                                                                                             

Page 148 of 169

 

CLI Commands, Continued… 

  

Set or Show the System IP Configuration 

Command Name 

Sysip 

Description 

Set system IP configuration mode, IP address, subnet mask, and gateway 
 
If no parameters are specified, this command will show the system IP addresses. Static 
IP, subnet mask, or gateway can be set while in either DHCP or static configuration 
mode as they will be used with IP fallback when in DHCP mode. If the Static IP is set to 
the default system IP address, IP fallback will not occur. All system addresses must be 
formatted as: xxx.xxx.xxx.xxx. 

Syntax 

sysip 

[-c config_mode] [-i static_ip] [-s static_subnet_mask] [-g static_gateway]

 

Parameters 

-c config_mode 

s(tatic) or d(hcp). 

-i static_ip 

 Static IP address (for static config mode and IP fallback ). 

-s static_subnet_mask 

Static sub net mask (for static config mode and IP fallback ). 

-g static_gateway 

Static gateway address ( for static config mode and IP fallback ).

 

Example 

N-TRON/Admin> sysip

 
IP Configuration Mode : Static 
Static IP Address     : 192.168.1.225 
Static subnet Mask    : 255.255.255.0 
Static gateway        : 192.168.1.1 
 

N-TRON/Admin> sysip -c dhcp 

 
IP Configuration Mode : DHCP (has been changed) 
Fallback IP Address   : 192.168.1.225 
Fallback Subnet Mask  : 255.255.255.0 
Fallback Gateway      : 192.168.1.1 
 
Press <ENTER> to Save Changes and Restart the System Now 
… 

N-TRON/Admin> sysip -i 192.168.2.119 -s 255.255.252.0 -g 
192.168.1.1 

 
IP Configuration Mode : Static 
Static IP Address     : 192.168.2.119 (has been changed) 
Static Subnet Mask    : 255.255.252.0 (has been changed) 
Static Gateway        : 192.168.1.1 (has been changed) 
 
Press <ENTER> to Save Changes and Restart the System Now 
… 

NOTES 

If mode is set to DHCP and IP fallback occurs, DHCP requests will stop. 
If mode is set to DHCP and IP Configuration is retrieved from a DHCP server, IP 
fallback will not occur, even if lease is lost. 

 

Summary of Contents for 708M12










































































































































































Reviews:

No comments