(Revised 2011-07-21)
Page 13 of 157
FRONT PANEL (7010TX)
From Top to Left:
Gigabit Ports
1000 Base SFP Copper or Fiber Transceivers (Optional)
RJ45 Ports
Auto Sensing 10/100 Base-TX Connections
LED lights when Power is supplied to the unit
NOTE: The RJ45 data port has two LEDs located on each connector. The left LED indicates LINK status,
and the right LED indicates ACTIVITY.
LEDs:
The table below describes the operating modes:
LED
Color
Description
GREEN
Power is ON
RED
Power is ON and a fault condition exists
OFF
Power is OFF
LNK
GREEN
10/100Mb Link between ports
OFF
No Link between ports
ACT
GREEN
Data is active between ports
OFF
Data is inactive between ports
Summary of Contents for 7010TX Series
